DROMEAS Alma HC 사용 설명서 - 페이지 11

{카테고리_이름} DROMEAS Alma HC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DROMEAS Alma HC 12 페이지. Working desk
DROMEAS Alma HC에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

Although the collision tracking system reliably detects even very small unusual movements

of the desk surface, it cannot be 100% guaranteed to avoid injuries to office users or

nearby people. As a result, no liability for body injury or other damages is assumed! Users

are responsible for avoiding injury and other damage during office operations.

3.7 Care and maintenance

When using the working desk for the first time, you may notice oil traces in lifting units. Please

wipe with a dry or slightly damp cloth. Commercial detergents available to clean the office

surfaces can be used. Only use care and cleaning products that are suitable for the respective

materials (wood, plastic, metal). The use of chemical or biological cleansers is not required.

The electric height adjustment mechanism of the desk does not require maintenance. Other

maintenance work must only be carried out by authorized specialist personnel.

A five year warranty is given for good operation. With regard to electrical components, a two-

year warranty is provided.

CAUTION: Moisture may damage the control unit and the control unit!

Keep the controller and control unit away from moisture and water

Disassembly must be carried out by qualified personnel. For reassembly, refer to section "3.3

Assembly and Installation".

A pallet truck is required to carry the desk. If unpacking is to be done on the floor, protective

material or carpet should be placed on the floor to avoid possible damage to the surface of the

office.

If storage is temporary, consider the maximum ambient temperature or humidity for storage

and transportation (see section 2.3.2).

WARNING: Risk of injury and damage!

When lifting the desk surface or attachments, the fastening screws may crack. When

transporting or moving the work desk, hold it only from the frame.

The product is designed to minimize the impact on the environment during its life cycle. All its

parts, which are made of plastic, metal and wood, are recyclable. On the other hand, replacing

parts of the product is easy if there is wear, so the product is not totally rejected.

If the product is ultimately disassembled and disposed of, please:

1. Disconnect the working desk from the power connections

2. Disassemble the working desk in individual parts