ELEGANT HOME CORDLESS ROMAN SHADE 설치 지침 - 페이지 2

{카테고리_이름} ELEGANT HOME CORDLESS ROMAN SHADE에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ELEGANT HOME CORDLESS ROMAN SHADE 4 페이지. Room darkening

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install this product.

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents

above. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time:

Tools Required for Installation (not included):

Helpful Tools (not included):

ATTENTION!

Use Spacers when mounting from above

The spacer is only necessary when you are mounting

from above because there is not enough clearance to

fully tilt the headrail and attach to mounting bracket during

installation.

Without use of the spacer, the top corner of the headrail

will be higher than the bracket causing it to hit the ceiling or

window frame preventing proper installation.

When mounting on the ceiling the spacer is always

necessary.

When mounting inside a window frame from above the

spacer MAY be necessary if the depth of the widow

exceeds the depth of the bracket.

Be sure to properly secure support rods before use

Before installing shade (AA), swing the pre-assembled support rods on the bottom

section of the back of the shade (AA) into the pre-assembled brackets. Press them

firmly sideways to snap into place.

Use small screw (DD) to secure support rod in place.

15 minutes

Pencil, Safety Goggles, Phillips Screwdriver, Tape Measure, Level.

Drill with 1/16 in. Bit, Step Stool.