Drone Sky Hook DSH-LSL1-MP 설치 및 운영 매뉴얼 - 페이지 14

{카테고리_이름} Drone Sky Hook DSH-LSL1-MP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drone Sky Hook DSH-LSL1-MP 17 페이지. Led searchlight with built-in laser pointer for dji mavic pro/pro platinum

페이지 인쇄

www.droneskyhook.com

Operation

Please click on the following link to watch the use of the drone Remote Controller C1/C2 button to control and set the

Drop Wheel and Searchlight. These videos are applicable for Mavic Pro, Mavic Pro Platinum, Phantom 4 and Phantom 3

together with Drone Sky Hook Release & Drop PLUS models only and a SearchLight.

https://youtu.be/bG4lBDKNdKE

https://youtu.be/l9lDXQcLWKQ

Operation of the LED SearchLight with Built-In Laser Pointer for DJI Mavic Pro and

Mavic Pro Platinum

Connect the Searchlight to the AUX Channel jack on the Release and Drop PLUS device.

Turn ON the AUX Channel and then select the Searchlight desired light output mode by pressing the Searchlight

pushbutton multiple times.

When the Searchlight is turned ON, the Red light on its batteries box will be illuminated.

See operation video in the product support page.

At the end of the Searchlight operation you must completely turn OFF the Searchlight to prevent continuous battery drain.

Verify that the AUX Channel is ON and then turn OFF the Searchlight by pressing its pushbutton multiple times until the

Red light on its batteries box turns OFF.

NOTE: The Searchlight draws standby current from its batteries even when the AUX Channel is OFF. Follow this

procedure to completely turn OFF the Searchlight and prevent continuous battery drain.

Press the SearchLight

pushbutton to turn it On or

Off and to change the

SearchLight operation

modes.

Press the pushbutton

multiple times to select the

desired operation mode or

function.

Page 14 of 17