Drone Sky Hook DSH-SRD1-P3 운영 매뉴얼 - 페이지 5

{카테고리_이름} Drone Sky Hook DSH-SRD1-P3에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drone Sky Hook DSH-SRD1-P3 7 페이지. Single/dual release & drop for phantom 4 / phantom 3 series drones, single/dual release & drop plus for phantom 4 / phantom 3 series drones

페이지 인쇄

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings –

Advanced Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your

command and before the initiation of the next command (False Command Avoidance Algorithm

(FCAA)).

Press C1 or C2 twice in quick succession (while

maintaining about 0.5-1 second between each press) to

drop the first payload.

Press C1 or C2 twice again in quick succession (while

maintaining about 0.5-1 second between each press) to

drop the second payload.

To set the drop wheel back to its previous position, again

press C1 or C2 twice in quick succession (while

maintaining about 0.5-1 second between each press).

In the App menu switch the drone's front LEDs ON, then

OFF and then back ON or OFF, then ON and then OFF.

(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to

simulate the operation of the C1 or C2 buttons on the

drone's remote controller (see above).

Maintain about 0.5-1 second idle duration between each

switch operation.

Press twice the device's FUNC button to simulate the

operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each

operation of the FUNC button.

Operation