Drop BMR1 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Drop BMR1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drop BMR1 5 페이지. Nearfield monitors

b. Bluetooth Mode – To enter this mode, single press from the default mode. When connecting for the

first time, the device will automatically enter pairing. Pairing Mode is characterized by fast pulse

blinking of the light. If connection is made, the light will turn to a solid blue. When idle and no active

connection, the light will slow blink. To pair to a different device, holding the button for 3 seconds

will activate Bluetooth Pairing Mode (must be in Bluetooth mode to do this).

Headphone Mode – Mode will be skipped when no headphones are detected. When in this mode

with headphone connected, the speaker output will be disabled until the mode is switch back to

either default or Bluetooth. It is also possible to use a gaming headset with mic support when the

BMR1 is connect with the supplied TRRS cable plugged into a compatible device such as a laptop.

d. Master Reset – Long press for 12 seconds to activate master reset in any mode. The light will turn off

for a short period and light up again signaling a successful reset.

Page 4 of 5

Quick Start Guide v1.3