Droper VET 사용 설명서 - 페이지 6

{카테고리_이름} Droper VET에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Droper VET 12 페이지.

2.2

Inserting the infusion line

Check that the choke or flow regulator is set to the OFF position.

Insert the spike into the infusion bag.

2.3

Placing the infusion bag connected with the infusion line

and closing the device

1. Insertion on the plate : With the cover fully open, position the bag to be administered on the plate

and attach it to one of the fastening hooks on the plate. Two fasteners are available according to

the model of bag used.

If the fastener does not correspond

to the bag model used, the operator

must maintain pressure on this bag

in a backwards direction to prevent it

from sliding forwards when closing

the device.

The device opens in three steps :

1. Exert pressure in a downwards direction on the cover using your

body weight and with outstretched arms. A resulting small

downwards movement can be observed.

2. Without releasing the pressure exerted

on the cover, rotate the two opening

levers using your middle fingers of each

hand. The fastening spring clips pivot

inwards and release the cover.

3. While holding the two open levers in position, release the pressure

exerted on the cover, then open the cover.

6/12