Anker A7911 사용자 설명서 - 페이지 2
{카테고리_이름} Anker A7911에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anker A7911 5 페이지. Aluminum bluetooth speaker
페이지 인쇄
Product Overview
1.
Volume Down / Previous Song
2.
Play / Pause
3.
Volume Up / Next Song
4.
Auxiliary Input Port
5.
Micro SD Card Slot
6.
Micro USB Charging Port
7.
Battery Indicator
8.
On / Off Switch
9.
Bluetooth Indicator
10.
Power Indicator
11.
Microphone
How to Pair with Your Device
1. Push the on / off switch to turn on the speaker. The speaker will automatically enter
pairing mode as indicated by a flashing Bluetooth Indicator.
2. Activate your device's Bluetooth function and search for the device.
3. Once the Bluetooth speaker has been detected, select the model name "Anker A7911" to
connect. (For devices with Bluetooth 3.0 and earlier, press "Yes" to begin pairing. Enter a
passkey or PIN code "0000" (4 zeros) and press "Yes" or "OK" to complete pairing.)
4. Once the speaker and your device have been successfully paired, the speaker will beep
once and the Bluetooth Indicator will come on.
When turning on the speaker, it will automatically connect to the last connected device as
long as Bluetooth is still enabled. Before pairing with another device, disable the Bluetooth
function on the previous device and the speaker will automatically return to pairing mode.
To switch to SD card or Aux Line-In modes, simply insert your Micro SD card
Note:
or the auxiliary cable and its connected device when in standby or Bluetooth
mode. The speaker enters Bluetooth mode by default when turning on the