DROPSA 0234561 사용자 운영 및 유지보수 매뉴얼 - 페이지 10

{카테고리_이름} DROPSA 0234561에 대한 사용자 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 0234561 10 페이지. Hydraulic barrel pump

15. OPERATIONAL HAZARDS

Verification and assessment relative to machine safety have been carried out according to the guidelines set out within the

European Machine Directive using a matrix evaluation schematic with the generation of technical file as required by the

directive.

The lists used are of two types:

• Risk evaluation (UNI EN ISO 14121-1).

• Conformity to essential safety requisites (Machine Directive –CE 06/42).

The following hazards have been identified as a result and must be considered during operation.

• During maintenance oil may be discharged at low pressures (oil squirt). To counter this, maintenance must be carried

wearing appropriate personal protective clothing and glasses.

• Electrocution: This can occur if the user does not securely connected the wires inside the terminal box. Electrical

connections must therefore be carried out only by a competent electrician.

• Physical Strain due to poor positioning of the unit. Detailed Dimensional information is given in this manual to avoid poor

positioning.

• Use of incorrect lubricant or fluids. Lubricant information is contained in this manual and on the pump itself.

Lubricants with abrasive additives

Lubricants with silicone lubricant additives

Petrol - solvents - flammable liquid

Corrosive products

Water

Food

FLUIDS NOT ALLOWED

FLUIDS

wear of pump internal components

Seizure of pumping element

Fire - explosion - damage to seals

Corrosion of the pump - damage to people

Oxidation of the pump

Contamination

DANGERS