DROPSA 201000 사용자 및 유지보수 매뉴얼 - 페이지 2

{카테고리_이름} DROPSA 201000에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 201000 10 페이지. Pneumatically operated pump

1. INTRODUCTION

This manual refers to a Pneumatically operated pump, series 201000. You can find additional copies and newer

revisions of this document from our website http://www.dropsa.com. Alternatively contact one of our sales offices.

Please read this manual carefully, as it contains important information on health and safety issues. A copy of this

manual should remain with the user of the product.

The pneumatic pump is designed to be utilized in mineral oil and grease lubrication systems.

3. MACHINE IDENTIFICATION

The pump identification label is located on the front side of the pump assembly and contains details of the operating

parameters of the pump including input voltage.

Lubricant outlet:

Compressed air inlet:

Lubricant:

Working pressure:

Working temperature:

Operating humidity:

Lubricant level control:

Level of continuous sound pressure

Standard compression ratio:

CAUTION: Operate the pump only with the voltage indicated on the product label and within the

specific operating parameters.

TECHNICAL CHARACTERISTICS

Rp ¼ BSPT tube seating Ø 8 mm (0.3 in)

G 1/8 BSPT tube seating Ø 6 mm (0.2 in)

NLGI 00 or NLGI 2 grease according to the specific pump

model (see chapter 11).

from 2 to 8 bar (from 29.4 to 117.6 psi)

-5 °C ÷ + 70 °C (23 °F ÷ 158 °F)

90 % rel.

Min and Max with reed type magnetic contact

Max. Voltage 220 V DC

Max. Current 0,8 A

Max. Power 20 W at 26 V AC

< 75 dB(A)

50:1 (see chapter 11)