Anker Nebula Capsule Max 사용자 설명서 - 페이지 12

{카테고리_이름} Anker Nebula Capsule Max에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anker Nebula Capsule Max 14 페이지.
Anker Nebula Capsule Max에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지)

페이지 인쇄

Specifications

Specifications and design are subject to change without

notice.

Power supply: DC 15V

Power consumption: < 20W

Standby power consumption: < 0.5W

Display technology: 0.3 in 1280 × 720p DLP

Light source: RGB LED

Projection image size: 20-100 in

Resolution: 1280 × 720p

Brightness: 200 ANSI Lumens

Contrast ratio: 600:1

Throw ratio: 1.3

Throw distance: 0.58 m to 3.08 m

CPU: Quad core A53

OS: Android 8.1

RAM: 2GB DDR

ROM: 16GB eMMC

Speaker drivers: 8W

Wi-Fi: IEEE802.11b/g/n/ac Dual Frequency 2.4G / 5G

Bluetooth version: 4.2

USB file system: FAT32 / NTFS / exFAT

Built-in battery type: Li-Polymer

Capacity: 9,700mAh 3.7V

Movie playtime: approximately 4 hours in battery mode (local video)

Recommended ambient: 41°F to 95°F / 5°C to 35°C

Relative humidity: 15% ~ 85% (non-condensing)

Storage temperature and humidity: < 149°F / 65°C, < 90% humidity

Dimensions (H × D): 150 × 80 mm / 5.9 × 3.1 in

Weight: 737 g / 26.0 oz

Troubleshooting

① Fail to power on by the remote control?

• Press and hold

for 2 to 3 seconds on the projector to turn it on.

• When powered off, you cannot use the remote control to turn it on.

② The remote control doesn't work?

• Make sure you remove the plastic battery insulation tab.

• Make sure the battery is already installed in the remote control.

• Replace the batteries.

③ Blurred image?

• Slightly move the projector to engage autofocus.

④ Cannot connect to a Wi-Fi network?

• Refresh the list of available networks and retry.

• Reboot the wireless router or the device and retry.

⑤ How do I update the firmware?

• When a new version is detected you will be asked to reboot and

update.