DROPSA 3414100 운영 및 유지보수 매뉴얼 - 페이지 14

{카테고리_이름} DROPSA 3414100에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 3414100 15 페이지.

13. Handling and Transport

Before shipment, the pumps are carefully packed inside a cardboard box. During transport and

storage of the equipment, pay attention to the direction indicated on the box. Upon receipt, check

that the packaging is not damaged and store the pump in a dry place.

 Flammability

The lubricant generally used in the lubrication circuits is not inflammable fluid. However, it is

imperative to take all necessary steps to prevent it from coming into contact with very hot

parts or naked flames.

 VALVE

Before any operation, check for the absence of any residual pressure in all branches of the

lubricant circuit, that could cause spurts of oil in the event that fittings or components are

disassembled.

 Noise

The equipment does not emit noise exceeding 70 dB (A).

ATTENTION: The warnings on risks using a lubricant pump implies must be carefully read. The user

must be familiar with operation through the Operation and Maintenance Manual.

A table is shown that compares the NLGI (National Lubricating Grease

Institute) and ASTM (American Society for Testing and Materials)

categories for greases, limitedly to the values that involve the

OmegaPUMP pump.

For further information on the technical characteristics and the safety measures to adopt, see the

Product Safety Data Sheet (Directive 93/112/EEC) related to the type of lubricant selected and

supplied by the manufacturer.

NOTE: The pump is designed to work with maximum NLGI 2 grade lubricants. Use NBR gasket compatible

lubricants. Any residual lubricant inside that was used for assembly and testing is NLGI 2 grade.

NLGI

ASTM

000

445 - 475

400 – 430

355 – 385

310 – 340

265 – 295