DROPSA 3416 Series 사용자 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} DROPSA 3416 Series에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 3416 Series 6 페이지.

페이지 인쇄

7. INSTRUCTIONS FOR USE

7.1 PRELIMINARY CHECKS

Verify the unit is undamaged.

Check that the hydraulic connections has been carefully carried out.

Refill the reservoir with impurity-free lubricant.

7.2 PUMP OPERATION

Operating the pump is very easy: to deliver lubricant simply pull and push completely the hand control lever and then release.

We recommend to carry out some lubrication cycles to discharge air from the system.

8. TROUBLESHOOTING

ANOMALY

Pump does not deliver

lubricant.

Pump does not deliver

the proper quantity of

lubricant.

Pump does not deliver

lubricant at the proper

pressure

9. MAINTENANCE PROCEDURE

The machine does not require any special tool for checking or maintenance tasks. However, it is recommended the use only of

appropriate and in good conditions tooling, protective devices (gloves) and clothing to avoid hazards to equipment or persons.

The machine has been designed and manufactured to require the minimum maintenance:

Keep the unit clean and periodically check the pipe joints to detect possible leaks.



10. DISPOSAL

During maintenance or disposal of the machine care should be taken to properly dispose of environmentally sensitive items.

Refer to local regulations in force in your area.

When disposing of this unit, it is important to ensure that the identification label and all the other relative documents

are also destroyed.

CAUSE

Pump intakes air because the

reservoir is empty

Loose fittings

Obstructed filter.

Incompatible lubricant

Pompa deteriorata

By-pass

valve

not

properly

Refill the reservoir and discharge air form the system.

Tighten the fittings. Be sure there are no leaks.

Clean or replace the filter

Verify lubricant thickness/viscosity and replace it, if necessary.

Sostituire pompa

regulated

Regulate the pressure valve (3294002)

SOLUTION