DROPSA 3417000 Series 매뉴얼 - 페이지 3

{카테고리_이름} DROPSA 3417000 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 3417000 Series 9 페이지. Micro-elettric pump

COMPONENTS

Micro-electric pump: The pump is cam actuated and the piston is spring controlled. The cycle time is fixed and is

determined by the type of reducer fitted to the electric motor. The flow rate varies between 0,2÷1cm³ e da 1÷5cm³. The

operating pressure is 4 bar. It is suitable for oil with a viscosity of 32÷250 cSt at a fluid working temperature between +5

°C and +40 °C.

Should it be required to use a different specification product, prior authorisation should be obtained from Dropsa S.p.A.

Electric Motor: Single phase motor 50-60 Hz, 24, 110 or 220 V. the absorbed power is 2.5 W – 3.5 VA at 50 Hz and 2 W –

2.5 VA at 60 Hz. Admissible voltage variation is ±10%.

Protection grade IP 54

insulation class - F

continuous service - YES

Reservoir: made of transparent plastic material in 1 L version and white plastic in 1.7 L version.

Minimum level indicator

Magnetic type

Reversible float with contact normally open at rest. To convert to normally open contact turn the float upside down. The

maximum power is 50 W ÷ 50 VA; the maximum voltage is 220 V ac – 150 V dc.

Suction filter: Filtration grade 260 micron