DROPSA 37012 사용자 및 유지보수 매뉴얼 - 페이지 13

{카테고리_이름} DROPSA 37012에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 37012 16 페이지. Motor driven gear pumps

12. DIMENSIONS

See tables in charter 11 "ORDERING INFORMATION"

13. HANDLING AND TRANSPORTATION

Prior to shipping, the equipment is carefully packed in a cardboard package. During transportation and storage, pay attention to

the side on the cardboard packing. On receipt, check that the packing is not damaged. Then, storage the machine in a dry

location.

It is necessary to carefully read about the instructions and the risks involved in the use of lubrication machines. The operator

must know the machine functioning through the User and Maintenance Manual

Inflammability

The lubricant generally used in lubrication systems is not normally inflammable. However, it is advised to avoid contact with

extremely hot substances or naked flames.

Pressure

Prior to any intervention, check the absence of residual pressure in any branch of the lubricant circuit as it may cause oil

sprays when disassembling components or fittings.

No particular operating hazards characterize Motor Driven Gear pumps, except for the following precautions:

Contact with fluid to break/open feed pipe. The operator must use appropriate protective clothing, gloves and take all

necessary safety precautions (D. Lgs. 81/08).

Awkward postures . Follow instruction in section 6.2.

Contact with oil during refilling / maintenance. The operator must use appropriate protective clothing, gloves and take

all necessary safety precautions (D. Lgs. 81/08).

Using the wrong lubricants:

Lubricants containing abrasive components

Lubricants containing silicon

Petrol – solvents – inflammable liquids

Corrosive products

Water

Food Products

Fluids

Premature wear of pump

Pump failure

Fire – explosion –seal damage

Pump damage - danger to persons

Pump oxidization

Contamination of the product

Dangers