DROPSA 3905000 사용자 운영 및 유지보수 매뉴얼 - 페이지 3
{카테고리_이름} DROPSA 3905000에 대한 사용자 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA 3905000 13 페이지.
페이지 인쇄
4. TECHNICAL CHARACTERISTICS
Empty weight
Motor power supply
Rated motor power
Degree of motor protection
Minimum level
Optical power supply level
Optical level output signal
Optical LED signal
Level connector (optical- floating switch)
Float Level output signal
Pressure switch
Pressure switch output signal
Pumping system
Flow rates (1500 rpm)
Maximum operating pressures
Outlet connection
Tank capacity
Filter
By-pass
Temperature of use
Operating humidity
Permitted lubricants *
Storage temperature
Continuous sound pressure level
N.b. The specifications refer to the temperature of use of +20°C (+68°F)
(1)
revolutions with load less motor
* If a different product is used, please contact Dropsa S.p.A. to ensure it is suitable for use (see page 12)
GENERAL CHARACTERISTICS
6.2 Kg
ELECTRICAL CHARACTERISTICS
230-400 V - 50 Hz
265-460 V - 60 Hz
110 V 50 Hz single phase 4p
230 V 50 Hz single phase 4p
24 V CC 2800 rpm
0.09 Kw – 0.11 Kw
IP 55
Optical (oil and fluid grease versions ) / With floating switch (only oil
version)
8÷28 V DC inversion protected
Type NPN/PNP short-circuit protected, off in the case of minimum
level. Max 1.7A
Active when tank is not empty
DIN 43650
Clean contact 50V max voltage, 40 W max power. SPDT
Contact closed in the case of max calibration pressure alarm
(3-18-30 bar)
Voltage free contact max voltage 42V, max. power 100 W
HYDRAULIC CHARACTERISTICS
Gear pump
350 cc/min - 500 cc/min (three-phase/single-phase versions)
600 cc/min - 850 cc/min (24V
- 70 bar -three-phase motor (with intermittent service max 5 min
with pause ratio 1:1)
- 40 bar (single-phase motor)
- max 30 bar with continuous service
G1/8" BSP
3L/6L
Degree of filtering 1000 µ
Adjustable 0 ÷70 bar – precalibrated 40bar (35bar for single-phase
motors)
+ 5 + 70 C
90 % rel. humidity
Mineral lubricating oil 32 cSt; grease max NLGI000
-20 +65 °C
< 70 dB(A)
three-phase
(1)
DC
)
version
Contact.
3