DROPSA MiQueL EXT PRO - i 사용자 운영 및 유지보수 매뉴얼 - 페이지 3
{카테고리_이름} DROPSA MiQueL EXT PRO - i에 대한 사용자 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA MiQueL EXT PRO - i 14 페이지. Air/oil modular minimal system with external pump
페이지 인쇄Application
Machine tools
Machines for cutting and bending plate
Steelworks
The units are supplied without accessories. The installer is responsible for providing the accessories needed for safe and
correct operation (condensate separator, filters, pressure gauges, by-pass, etc...).
3. MACHINE IDENTIFICATION
There is a plate on the side of the unit that displays the product code, the power supply voltages and the basic characteristics.
4. TECHNICAL SPECIFICATIONS
Pumping system
Maximum number of modules
Maximum Oil inlet pressure
Air inlet pressure
Maximum air consumption at the outlet
Air inlet pipe
Oil inlet pipe
Air outlet pipe
Oil outlet pipe
Oil flow rate per element (with compensation valve)
Lubricant
Pressure switch calibration
Element solenoid valve power supply
Operating temperature
Storage temperature
Max relative humidity without operating condensate
Sound level pressure
5. MACHINE COMPONENTS
Air regulation
Pressure gauge
(optional)
Push-in pipe Ø6 air
outlet
Push-in pipe Ø3 oil
outlet
TECHNICAL SPECIFICATIONS
External pump
8
2,5:1 in relation with air inlet pressure
4bar ÷ 7bar [87psi ÷ 101,5psi]
~50Nl/min (per module)
Ø6mm
Ø6mm
Ø6mm
Ø3mm
0 ÷ 2cc/min (oil 10cSt ÷ 32 cSt)
0 ÷ 0,5cc/min (oil 32cSt ÷ 100 cSt)
10cSt ÷ 100cSt
6bar [87psi]
24Vdc
+5°C ÷ +50°C
-10°C ÷ +80°C
90%
< 70 db (A)
MODULAR ELEMENT
Solenoid valve
i
("
" version only)
-
Oil regulation
Compensation valve
("PRO" version only)
3