DROPSA VIP4Air Series 사용자 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} DROPSA VIP4Air Series에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA VIP4Air Series 13 페이지. Minimal air/oil lubrication system
DROPSA VIP4Air Series에 대해서도 마찬가지입니다: 사용자 및 유지보수 매뉴얼 (16 페이지)

Mixer base with flow rate sensor
In the mixer base there is an integrated lubrication detector system with a self-setting sensor. This sensor does not require to be
regulated or calibrated as it automatically adapts to the functioning conditions and the type of lubricant.
The detection system is interfaced, by means of an electrical connection completely integrated into the mixer base, with the
VIP4Air panel mounted on the central unit. Where an anomaly occurs this is detected by the central unit, which signals the
error.
The functioning is also indicated by an LED mounted on the base itself.
When the VIP4Air starts a lubrication cycle, the LED located on the mixer base illuminates (ON) until the end of the lubrication
cycle. During the pause the LED is not illuminated (OFF).
Tank
Central
unit
Mixer base
Solenoid valve
4
Oil filler
cap
Pressure
regulator
Mini-pump