AnkerWork BR300 USB 사용자 설명서 - 페이지 7
{카테고리_이름} AnkerWork BR300 USB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnkerWork BR300 USB 19 페이지. Video conference bar
페이지 인쇄Connecting
Option A: Connecting to Computer (USB Cable)
1. Plug the provided power adapter and power plug into the video bar.
- The LEDs on the video bar will turn white.
2. Connect your computer to the USB-C port on the video bar using the provided USB cable. Your video bar will be ready to use
when connected.
3. Connect the computer to one or more monitors depending on the computer's capability.
4. Optional: To stream video from the video bar, connect it to a monitor using an HDMI cable (not included).
5. Optional: To extend the voice pickup range in a medium-sized meeting room, connect an external microphone* to the USB-A
port on the video bar using the USB cable (not included).
3
EN 10
4
1
2
5
• The video bar will automatically turn on once connected to a power supply.
• Your computer and video bar cannot be connected to the same monitor simultaneously.
• Make sure to select "AnkerWork BR300 USB Video Conference Bar" as the audio and video device in your conferencing
software.
*AnkerWork BR300 USB External Mic is available for purchase.
Option B: Connecting to Smartphone (Bluetooth)
The video bar only supports audio calls when connected to a smartphone via Bluetooth pairing.
1. Press
on the remote to enter Bluetooth pairing mode.
- The LEDs on the video bar will flash blue.
2. Select "AnkerWork BR300 USB Video Conference Bar" on your device's Bluetooth list to connect.
- When successfully connected, the LEDs on the video bar will turn solid blue.
1
Pairing
Connected
AnkerWork BR300 USB
Video Conference Bar
2
11 EN