DROPSA MiQueL 사용자 운영 및 유지보수 매뉴얼 - 페이지 12

{카테고리_이름} DROPSA MiQueL에 대한 사용자 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DROPSA MiQueL 12 페이지. Air/oil modular minimal system

15. OPERATING HAZARDS

Compliance with the essential safety requirements and the provisions specified in the machine directive was checked by

filling out prepared check lists that are contained in the technical file.

Two types of lists were used:

• Risk assessment (UNI EN ISO 14121-1).

• Compliance with the essential safety requirements Machine Directive –EC 06/42).

The risks that were not completely eliminated, but considered acceptable, are specified below:

• During maintenance, sprays of oil at low pressure are possible (for this purpose, suitable PPE must be worn during

maintenance activities).

• Electrocution: This can only occur in the case of serious user incompetence, but the user must be qualified.

• Unsuitable postures: The correct dimensions and installation methods are described in this manual.

• Use of unsuitable lubricant: The specifications of the lubricant are indicated both on the unit as well as in this User and

maintenance manual (in the case of doubt, contact the Dropsa S.p.A technical office.).

Lubricants with abrasive additives.

Lubricants with silicone additives.

Petrol – solvents – inflammable liquids.

Corrosive products.

Water.

Food substances.

FLUIDS THAT ARE NOT PERMITTED

FLUIDS

Wear of internal components.

Seizure.

Fire – explosion – damage to the gaskets.

Corrosion - damage to people.

Unit oxidation.

They would be contaminated.

RISKS