ELEKTRA Microcasa MS 교육 매뉴얼 - 페이지 7

{카테고리_이름} ELEKTRA Microcasa MS에 대한 교육 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ELEKTRA Microcasa MS 11 페이지.

Adjusting the dose

Before changing the dose, make sure all chambers in the dosing
wheel are full and that the coffee has been rolled as described on the
previous page. See page 8 for details of the dispensing unit.
1. Turn the dose adjustment knob
one click to change the dose:
To reduce the dose, turn the
knob clockwise.
To increase the dose, turn the
knob anti-clockwise.
While making this adjustment, place a
finger or thumb into the dispensing
unit outlet so the wheel is prevented
from turning.
2. After making an adjustment, test
the dose by grinding more coffee
and rolling it to ensure all dosing
chambers are full. Fill a single cup
basket and tamp the grounds, then check if the right quantity of
coffee has been dispensed. Make further adjustments as
required.

Number of doses

The following assumes the dose has been adjusted for the particular
Elektra domestic espresso machine being used with the grinder.
Nivola
(W only)
The above machines need two pulls of the dosing lever to fill a single
basket and three pulls of the dosing lever for a double basket. The
coffee level should be 4–5mm from the rim of the coffee basket after
the grounds have been tamped.
The machine on the right needs one pull of
the dosing lever to fill a single basket and
two pulls of the dosing lever for a double
basket. The coffee level should be 4-5 mm
from the rim of the coffee basket after the
grounds have been tamped.
Adjusting the dose of coffee
dispensed with each pull of
the dosing lever
Micro Casa
Semiautomatica
(all models)
Micro Casa a Leva
(all models)
5
Mini Verticale
Semiautomatica
(all models)
Training manual – Grinders