anko BCW-50A 사용자 설명서 - 페이지 7

{카테고리_이름} anko BCW-50A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko BCW-50A 12 페이지. 18 bottle wine cooler

Instructions for Use

Please note that this appliance is a wine cooler and must not

be used as a refrigerator to store food.

After installing the Cooler and ensuring the unit is level as described under the heading "Levelling

the Appliance", plug into an Earthed Power point and switch on.

WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of

the appliance.

WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.

It is recommended you install the Wine Cooler in a place where the ambient temperature is between

20º - 25ºC / 68º - 77ºF.

If the ambient temperature is above or below recommended temperatures, the performance

of the unit may be affected.

Should you require your wine to be cooler, we suggest you place in your refrigerator approximately

30 minutes prior to serving.

Recommended Temperatures for Chilling Wine.

Red Wines:

•

Dry/White Wines:

•

Sparkling Wines:

•

Rose Wines:

•

Temperature Range of your Wine Cooler is 12 - 18ºC (54º - 64ºF).

Note: Placing your unit in extreme cold or hot conditions may cause

interior temperatures to fluctuate. The range of 12 - 18ºC / 54º - 64ºF may

not be reached.

You can select either Fahrenheit or Celsius temperature display setting by pressing

for 2 seconds.

NOTE: The default display is shown in Celsius.

14 - 18ºC (57- 65º F)

9 - 14º C (49- 58º F)

5 - 9º C (40- 49º F)

10 - 11º C (51- 53º F)

Page 7 of 12

button