Beckman Coulter Cytomics FC 500 시작하기 - 페이지 10

{카테고리_이름} Beckman Coulter Cytomics FC 500에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Beckman Coulter Cytomics FC 500 20 페이지. With cxp software
Beckman Coulter Cytomics FC 500에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

페이지 인쇄

FC 500 Workstation

The FC 500 Workstation receives information from the Cytometer, sets protocols

and panels, analyzes results, then displays, stores and prints the results. The

CXP software gives you immediate access to these features:

Displays the Cytometer Control dialog box to adjust the

cytometer settings and select parameters.

Starts acquisition or continues an acquisition if previously paused.

Pauses the acquisition of the current sample.

Stops the acquisition of the current sample and outputs results.

Runs a carousel of samples one tube at a time.

Runs a single tube in fixed position #10.

Clears the Acquisition Manager to create a new worklist.

Inserts a panel from file into the current worklist.

Places the Cytometer in the Idle mode in order to perform various

cleaning and replacing procedures.

Flushes the sample line and flow cell with sheath fluid to declog

or remove bubbles.

Flushes the sample line and flow cell with cleaning agent.

Performs the Vacuum Line Cleaning procedure.

Accesses the CXP online Help System.

Note: For a complete list of software icons, see the CXP online Help System.