Elektra Beckum BAS 315 사용 설명서 - 페이지 6
{카테고리_이름} Elektra Beckum BAS 315에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elektra Beckum BAS 315 7 페이지. Guide de precision a trois rouleaux pour scie a ruban
Elektra Beckum BAS 315에 대해서도 마찬가지입니다: 매뉴얼 (19 페이지), (프랑스어) 마누엘 (4 페이지)
페이지 인쇄
^
*
5.5 Setting of Saw Table
For bevel cuts the saw table can be steplessly tilted up to 45°. To tilt, loosen the lock lever (25) holding the upper
trunnion (92) to the lower trunnion (91), swing table to desired position and retighten nuts.
Use wide slot table insert (23), so blade can travel freely.
6.0 Additional Safety Rules
1. Disconnect from power changing blades or servicing machine.
2. Before switching machine on be sure that all guards are in place and securely locked.
3. Do not use cracked or bent saw blades.
4. Replace table insert (23/88) if slot has enlarged.
5. For cutting operations with tilted table the rip fence must be placed to the right of the blade.
6. When cutting round stock use a suitable jig to prevent work from turning.
7. When cutting boards in an upright position use a suitable pushblock to prevent kickback.
Jig for cutting round stock
7.0 Optional Accessories
7.1 Crosscut/Mitre Fence PK/BAS
Stock-no. 091 000 8048
(for 3-pc. Table ass'y only)
Push block
7.2
Band Saw Blades
All blades Swedish steel with induction-hardened teeth
General purpose
blade
tooth spancing 6 mm
2240x 12x0,5 mm A4
stock-no.
090 900 0467
-
Blade for wood
circular cutting
tooth spacing 4 mm
2240x6x0,5 mm A6
stock-no.
090 900 0475
Blade for wood
ripping
tooth spacing 6 mm
2240x15x0.5 A6
stock-no.
090 900 0483
Blade for
NF-metals
tooth spacing 2 mm
2240x15x0,5 A2
stock-no.
090 900 0491