anko SB-0802C1 사용자 설명서 - 페이지 6

{카테고리_이름} anko SB-0802C1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko SB-0802C1 7 페이지.

CLEANING AND CARE

NOTE: To reduce build-up of milk residue, always empty any residual milk and clean

immediately after frothing is completed. Never leave liquid in the milk frother overnight.

1. Unplug the power base from the electrical outlet and let the milk frother cool down completely

before cleaning.

2. Clean the inside of the jug with a damp & soft cloth, or sponge. Only the whisk can be detached to

rinse with water.

3. If necessary, put on the whisk attachment to the whisk head. Fill clean water to MAX. level mark,

then add a couple drops of mild liquid soap. Turn the milk frother ON and allow the soapy water to

clean the jug. After the milk frother turns itself OFF, discard the soap water. Pour fresh clean water

into the jug and discard; repeat until soap residue is completely removed. Wipe out with damp cloth.

WARNING! Do not immerse the milk frother or the power base in water or any other liquid.

Never place the milk frother under running water to clean. Do not place in the dishwasher.

4. Make sure that all electrical connectors and sockets are kept dry.

5. Rinse lid and whisk in clean water and dry thoroughly.

6. Never use any solvents or abrasive cleaning agents, hard brushes, metal or sharp objects to clean.

Solvents are hazardous to health and harm the product's plastic parts; abrasive cleaning agents and

cleaning accessories may scratch the product's surfaces.

STORAGE

1. Unplug the milk frother and allow it to cool.

2. Store in its box in a cool and dry place.

3. Never store the appliance while it is still connected to mains power.

4. Never wrap cord tightly around the appliance.

5. Do not put any stress on the cord where it enters the appliance as it may cause the cord to fray and

break.

Voltage : AC 220-240V 50Hz

Power : 450 - 550W

Capacity: MIN: approx.75ml

MAX

: approx.130ml

MAX: approx.300ml