anko SBL-2807C 사용자 설명서 - 페이지 7

{카테고리_이름} anko SBL-2807C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko SBL-2807C 9 페이지.

HOW TO OPERATE

DO NOT operate this appliance without the Extractor Head in place.

NEVER place sugar directly on the heating element as sugar is

flammable and could cause a fire.

1. First, find a stable surface near an electrical outlet before starting. Make sure the cord

is away from any water source.

2. Plug in unit on the OFF position.

3. Turn unit to ON position and allow appliance to run for at least 10 minutes before

adding sugar. This will allow the Extractor Head to heat up properly.

NOTE: Hard candy must not be used on the candy maker.

4. Turn unit OFF and place no more than one spoon of flavoured sugar into the

Extractor Head.

5. Switch to ON position.

6. When you see the cotton candy web begin, collect the cotton candy on a cone by

holding the cone vertically. Rotate the cone with your fingers while you circle the

bowl.

7. Once cotton candy has collected on the cone, hold the cone in a horizontal

position over the Extractor Head while still rotating the cone with your fingers.

Continue turning the cone with your fingers while the cone is in the horizontal

position and move from side to side making sure to collect all the cotton candy.

8. Repeat above steps by adding another spoon of sugar into the Extractor Head

and starting again. The cotton candy should flow more quickly as the unit is

sufficiently warm.

NOTE: DO NOT overfill the Extractor Head by adding more than 1 spoon of sugar at a

time. This will cause clogging and unit will not work properly.