anko BFT1803R 사용자 설명서 - 페이지 9

{카테고리_이름} anko BFT1803R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko BFT1803R 12 페이지.

Important: Always operate the product on a flat, level, steady, and stable surface to

avoid it overturning.

5.2

Fan Only

Insert the plug into a standard electrical power point and switch on at the power

•

point.

The "Nor." indicator light on the front panel will illuminate Red

indicating Power is supplied to the unit and is in Standby Mode.

Press the On/Off button on the control panel, or the

•

remote control to turn the fan on.

Note: The Red Standby indicator light will turn off and a Blue indicator

light will illuminate.

The Fan will briefly start with "Mid" fan level but will then switch to Low

•

Fan speed and "Nor" fan mode. This is the default setting.

To increase the fan speed, press the "Speed" button on the control

•

panel, or the

speed to the "Mid" setting.

•

Press the speed button on the control panel, or the

remote control again, and the fan will increase to "Hi" fan setting.

Press the speed button on the control panel, or the

•

remote control again, and the speed will cycle back around to "Low"

fan speed.

To Turn Off, press the On / Off button on the control panel, or the

•

button on the remote control.

button on the remote control and the fan will increase

Page 9 of 12

button on the