anko LW03-19AR 사용자 설명서 - 페이지 5
{카테고리_이름} anko LW03-19AR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko LW03-19AR 6 페이지. Bladeless fan
페이지 인쇄
FUNCTIONS
1. Speed+/ Speed- button
Each press of "Speed+/-" button advances the Speed setting and
indicated on the fan display.
Fan speed will cycle from 1 (Lo), 2 (Med) and 3 (High).
2. Timer+/ Timer- button
This function sets the duration of operation before the fan
automatically turns OFF.
Each press of "Timer+/-" button will increase or decrease the time of
operation by 1 hour. Maximum timer setting is 9 hours, timer setting
selected is indicated on the fan display. (i.e. 1h-2h-3h.....9h)
The timer will count down until the time has expired, then the fan will
switch off automatically.
To cancel the timer, press "Timer+/-" button until it cycles back to no
timer display is shown on the fan display.
3. Light button: Turn On/Off the LED light.
4. OSC button: Turn On/Off the oscillation function.
5. Screen off button: Turn On/Off the display screen on the fan.
6.
(On/Off button): Press once to Turn On the fan; press second
time to Turn Off.
CARE AND CLEANING
Switch OFF and make sure to unplug the unit from mains power prior to cleaning.
Clean the body with a clean, damp cloth and wipe dry.
Never spray with liquids or submerge the Fan in water or any other liquid.
Do not use flammable liquids, chemicals, abrasive cleaners, steel wool or scouring pads for
cleaning.
STORAGE
Switch OFF and unplug the unit from mains power.
Coil the power cable loosely. Do not kink or pull the cable tight.
Remove the batteries from the remote control if not used for a long period of time.
Store in a cool dry well-ventilated area in the original box if possible.
SPECIFCATIONS
Model No.
Voltage
Frequency
Rated Power
LW03-19AR
220-240V
50Hz
65W