anko LD-K9030 사용자 설명서 - 페이지 8
{카테고리_이름} anko LD-K9030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko LD-K9030 10 페이지.
페이지 인쇄
9. After the water has come to a boil, wait a moment, until the water has stopped simmering.
Then remove the kettle from the water base.
10. Pour the water out slowly to avoid splashing. Do not open the lid while pouring out the
water.
* The sieve insert in the spout prevents any larger particles of scale being poured out.
* Do not re-boil stale water. Pour it away and refill with fresh water for boiling. This will also help
prolong the life of the
kettle.
DANGER– risk of electric shock
* Remove the supply cord plug from the mains power outlet socket before cleaning the kettle.
* The power base, plug and mains cord must not come into contact with water or other liquids.
* The water container must not be immersed in water.
* The product and its parts must not be cleaned in the dishwasher.
IMPORTANT! Damage to exterior
* Do not use caustic, aggressive or abrasive cleaning products for cleaning the kettle exterior.
Cleaning
• Remove the supply cord plug from the mains power outlet socket and let the water kettle
cool down completely.
• Wipe the base and power cord with a dry cloth.
• Wipe the outside of the jug with a slightly moistened cloth.
• Pull the sieve out of the spout and rinse it under running hot water.
• Slide the sieve back into the spout as far as it will go.
Descaling
IMPORTANT! During the below process, DO NOT fill the kettle more than the Min. (0.5L) mark
on the kettle. Filling above the Min. mark will cause overboiling and spillage out of the spout.
The kettle must be descaled at regular intervals, especially if the power base is visibly
encrusted with lime scale. Regular descaling saves energy and increases the service life of the
kettle.