Elektra Beckum 170 - 230 Amp Models 작동 지침 - 페이지 7
{카테고리_이름} Elektra Beckum 170 - 230 Amp Models에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elektra Beckum 170 - 230 Amp Models 17 페이지. Soudure semiautomatiques mig/mag 170 - 230
Elektra Beckum 170 - 230 Amp Models에 대해서도 마찬가지입니다: (프랑스어) 통지 D'utilisation (18 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. User Responsibility
- 3. Specifications
- 4. Regulations for the Prevention of Accidents
- 5. Welding Output
- 6. Operation
- 7. Installing the Wire Spool
- 8. Welding Stainless Steel and Aluminium
- 9. Practical Hints for MIG Welding
- 10. Maintenance
- 11. Trouble Shooting
- 12. Spare Parts List and Accessoires
230 V/ 400 V
Combi Machines
Combi models come with a CEE 3-phase 5 prong plug
fitted to power cord as standard, and an adaptor with
1-phase plug.
If a 3-phase plug matching your local standard outlet
has to be installed, connection has to be made to 2
phases, neutral and earth.
Caution: Have machine connected to power mains by a qualified electrician only!
Neon Control Light
Welding step selector
Mains on/off switch
Earth cable socket
4
Installing the Wire Spool
4.1 Disconnect from power mains
Place wire spool onto spool carrier so that wire runs off clockwise.
For 380/415 V operation
connect to 2 phases + zero
and earth lead
L1 black
L2 brown
zero/neutal lead blue
earth lead yellow/green
Central coupling KZ 2
for welding gun
Wire feed regulator
Weld time pot
Dwell time pot
Welding mode selector
(E-models only)