anko 42969266 매뉴얼 - 페이지 4

{카테고리_이름} anko 42969266에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. anko 42969266 10 페이지.

Safety Precautions:

• The thickness of the mattress must be such that the vertical height (upper surface of

the mattress until the upper edge of the product's sides) is at least 200mm.

• Do not use more than one mattress in the product.

• The reference mark on the product's interior indicates the maximum thickness of the

mattress that shall be used.

• Do not leave any object inside the product that could reduce its depth.

• Do not position the product near walls and obstacles to prevent trapping hazards.

• Do not leave small objects inside the product to prevent choking hazards.

• Use only spare parts approved by the manufacturer. Do not apply accessories to the

product, which are not supplied by the manufacturer.

• Do not adjust the product with the child inside.

• Do not move the product with the child inside.

• Do not use the product for more than one child at a time.

• The product must be kept away from electric cables and cords: do not place the

product near windows where cords, curtains or similar objects could pose choking

or strangulation hazards for the child. To avoid strangulation hazards, do not give to your

child or place near her/him, objects equipped with cords.

• All assembly ﬁttings should be tightened properly and care should be taken to

ensure no screws are loose, as a child could trap parts of their body or clothing

e.g. strings, necklaces, ribbons etc. which could pose a risk of strangulation.

• A prolonged exposure to the sun may cause changes of tones to the product's

colour. After prolonged exposure of the product to high temperatures, wait a few

minutes prior to placing your child in it.

• When not in use, keep the product away from the reach of children.

CO-SLEEPING MODE (FIXED TO BED)

• The side support of the Co-Sleeper Bassinet should always be put close to the adult

mattress and the mattress should always be aligned with the height of the side support

for restraint of the Co-Sleeper Bassinet. Furthermore, the Co-Sleeper Bassinet should

be ﬁrmly ﬁxed to the structure of the adult bed or to the mattress support.

WARNING! Check to make sure that the Co-Sleeper Bassinet in the "co-sleeping mode"

does not interfere with the adult bed.

WARNING! Use the Co-Sleeper Bassinet with the tube lowered, only in

"co-sleeping mode" (ﬁxed to bed).

Page 4

Storage/Transport:

A bag (F) is included for easier carrying, transportation or storage.

Dismantle the Co-Sleeper Bassinet before inserting into the bag.

Page 17