anko LD-T9006C 사용자 설명서 - 페이지 5
{카테고리_이름} anko LD-T9006C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko LD-T9006C 7 페이지.
USING YOUR TOASTER
Important: Never let the toaster operate unattended.
Important: Do not operate the toaster without the crumb tray.
Toasting
1. Unwind the power cable to the required length and plug it in.
2. Use the Browning control button to set the required toasting level between 1 and 6. For
a medium, golden brown select level 3-4.
3. Place the bread to be toasted in the Toast slot.
4. Press the Push-down lever down until it engages. The LED on the CANCEL button
lights up.
5. Toasting ends when the bread being toasted is raised up. The LED on the CANCEL
button goes out.
Note: The toasting can be interrupted at any time by pressing the CANCEL button.
Never lift the Push-down lever to cancel toasting.
Tip: If you toast only one slice, set the toasting level lower than for two slices.
Reheating cold bread or toast
1. Insert the cold bread to be toasted.
2. Press the push-down lever down until it engages. The LED on the CANCEL button
lights up.
3. Press the REHEAT button. The LED on the REHEAT button lights up.
Toasting frozen bread
1. Select normal degree of toasting.
2. Insert the frozen bread to be toasted.
3. Press the push-down lever down until it engages. The LED on the CANCEL button
lights up.
4. Press the DEFROST button. The LED on the DEFROST button lights up.
CAUTION
1. Remove all protective wrappings prior to toasting.
2. If toaster starts to smoke, Press CANCEL to stop toasting immediately.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster from
the electrical outlet first. Be sure not to damage the internal mechanism or heating
elements when removing bread.
5. The bread slot is for toasting regular bread slice.
6. To achieve uniform toast colour we recommend that you wait a minimum of 30s
between each toasting time so that browning colour control can reset automatically.
4