anko BL3403A 사용자 설명서 - 페이지 5

{카테고리_이름} anko BL3403A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko BL3403A 7 페이지. Portable usb blender

 The supplied USB charging cable should be inserted into the standard USB power source rated at

5Vd.c. 1A specification. The charging time is 4-5 hours. The indicator will light in red during

charging and turns blue after fully charged.

USING YOUR PORTABLE USB BLENDER

WARNING: Do not put hot ingredients or liquid above 55℃ in the juice cup to avoid bursting,

splashing and to prevent scalding.

IMPORTANT: The blender is designed for blending soft food ingredients only. Do not blend hard or

sticky/thick ingredients.

1. Place the juice cup on the main unit and turn it clockwise and screw-in properly on to the base until

you hear a slight "click".

2. Wash the fruit, cut the flesh into 1.5cm x 1.5cm pieces and put them into the cup (always remember

to remove the fruit core, thick skin or hard shell before blending). Add drinking liquid to the MAX

line on the cup (300mL), and screw in the filter and the cap.

3. Double-click the power switch, and the appliance will start stirring with blue light on. Shake the

appliance gently while stirring if needed.

Note: If the blade and pulp are stuck during the process, the appliance will stop automatically with the

red indication light flashing. Turn the appliance horizontally or tilt it until the blade is separated from the

pulp. Restart the appliance to continue stirring.

During the mixing process, if you click the switch, the appliance will stop working. To restart the

appliance, double click the switch again.

4. The appliance will automatically turn off after 30seconds of stirring. Unscrew the lid to drink the

juice from the cup。

5. NOTE: Do not continuously stir with excessive intensity.

Power switch