Ankom XT15 청소
{카테고리_이름} Ankom XT15에 대한 청소을 온라인으로 검색하거나 PDF를 다운로드하세요. Ankom XT15 4 페이지. Extractor sight glass assembly
Ankom XT15에 대해서도 마찬가지입니다: 서비스 절차 (5 페이지)
페이지 인쇄
1.
Remove the back cabinet.
a. Remove the eight screws (four on each side of
the instrument) that secure the back cabinet
onto the instrument using a 1/8" Allen wrench.
Set aside the screws for later use.
b. Lift up then pull back so the handles on each
side slide out of the notched groove.
2.
Unscrew the compression fitting using a 9/16 wrench.
ANKOM Technology • 2052 O'Neil Road • Email: [email protected] • Phone: 315-986-8090 • Fax: 315-986-8091
Solvent filter cleaning
XT10/XT10I and XT15/XT15I
Service Procedure
Screws
Notched
groove
Figure 3
XTS016
JAD 1/19/2018
Figure 1
Figure 2
pg. 1 of 4