ANLIDAR MYTORQ MYBT-AS0212S1 운영 및 유지보수 매뉴얼 - 페이지 8

{카테고리_이름} ANLIDAR MYTORQ MYBT-AS0212S1에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ANLIDAR MYTORQ MYBT-AS0212S1 13 페이지. Automatic industrial cordless brushless power torque screwdrivers

페이지 인쇄

(3) Bit Sleeve

To Switch the bit and compatibility, pull the head of the type B screwdriver, and install the bit

according to the diagram below, and push it in following the arrow indicated on the diagram.

(4) Torque Adjustment Ring:

Turn torque adjust ring counter clock wise to increase torque output, on the other hand decrease

torque output by turning torque adjust ring clock wise. 0 printed on the torque adjust ring indicates

the minimum torque for setting and 8 for the maximum torque setting. Do not turn torque adjust ring

lower than 0 or higher than 8 to avoid torque adjust ring getting stuck with clutch.

(5) Coupler

5-1 Coupler: Fixed upside-underside housing and clutch.

(6) Driver Hook

It is convenient for the production lines efficiently to have spring balancers to work together

with the tools to be more.

Pull the bit holder

Insert the bit

Coupler