ANLIDAR MYTORQ MYBT-SC0408 운영 및 유지보수 매뉴얼 - 페이지 8

{카테고리_이름} ANLIDAR MYTORQ MYBT-SC0408에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ANLIDAR MYTORQ MYBT-SC0408 12 페이지. Semi-automatic cordless brushless power torque screwdrivers series

페이지 인쇄

(5) External Torque adjustment ring

The purpose of the torque adjustment is to have the torque level changed from level 1~23; each

level has different torque, follow the direction as below showing while the figure value gets

bigger means for more torque.

Direction of rotation

Torque adjustment ring

portrayed Digital larger torque

follow larger.

(6) Hole for wrist band

Enable to install the wrist band which is more convenient and safer for users.

(7)Waist hook

The waist hook allows users to carry the device easily by attaching it to their work belt.

(8) Functional light and the status indicator

Whenever the remaining power in the rechargeable battery is fewer than 20%, the tool is still

alive but with red flash lights on. Once the remaining power is towards10% or even fewer it may

result in poor performance with the continuing red lights on.

(9)H/M/L Switch

With three level speed control design for applying to different application. Be sure that choice the

suitable speed level and torque scale for different material and joint before tightening.

Speed adjustment

Mid

The suggested maximum torque scale for each speed level show as below:

Function

Operation Speed Ratio

Suggested MAX Torque Scale

100%

75%

50%

1~23 steps + Max steps

1~17 steps

1~11 steps