3M 701 보정 절차 - 페이지 7

{카테고리_이름} 3M 701에 대한 보정 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 701 7 페이지. Megohmmeter
3M 701에 대해서도 마찬가지입니다: 운영자 매뉴얼 (8 페이지), 운영자 매뉴얼 (9 페이지)

The accuracy of the 701 is based on two tolerances (+/- 5% electrical & +/-2 deg. of arc,

meter's needle movement). The sum of these two tolerances are identified by two tiny

dots, one on each side of the major intervals (100 kilohms, 1megohm, 10 megohms, 100

megohms, 1gigaohm, and 10 gigaohms) marks located on the top scale. So to check the

701 for resistance measurement accuracy you need to test resistances at the major

intervals and confirm that the readings fall within the dots. Please be aware that we are

faxing the calibration procedure for the 701 Megohmmeter to you at the fax number

listed below.