Becom BE-ART-50 설치 및 운영 매뉴얼 - 페이지 8

{카테고리_이름} Becom BE-ART-50에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Becom BE-ART-50 11 페이지. Twin arm kneading machine

5. Machine description

The machine consists of the following main parts:

1. Mixing tank

2. Kneading arms

3. EC standard safety protection

4. Operation controls

5. Upper transmission guard cover

6. Machine unit

7. Main ON/OFF switch

8. Electric system guard cover

9. Lower transmission guard cover

10. Rear transmission guard cover

11. Pair of front feet used to stabilize the machine

This machine is designed and produced specifically to mix oven cooked products.

The machine is designed and produced to operate in closed environments that are protected from

atmospheric agents.

The machine is powered by electricity, which is converted into mechanical energy for the intended uses.

Using the machine in an explosive atmosphere.

Using the machine in a flammable atmosphere.

Using jets of water to washing the machine area where the control equipment is located.

Fixed and mobile shields

All the drive units are protected by a casing

(A), fastened as indicated by the EN 953

Directive. The mixing area is protected and

cannot be accessed by the operator with the

machine running, thanks to an EC standard

protection grid (B).

Emergency stop

The machine is equipped with an emergency STOP button (C), located on the machine console, which allows the

operator to stop the machine in emergency cases. In addition, there is a rapid stop system (micro - D) installed

inside the protection grid rotation system, which instantly blocks the rotation of the moving parts when the grid

is raised.

BE-ART

Page 7