3M 725 사용 설명서 - 페이지 10

{카테고리_이름} 3M 725에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 725 15 페이지. Wrist strap monitor
3M 725에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Section 5.

Installation Using 723 Belt

Clip (Optional)

An optional belt clip is available to

further enhance the portability feature

of the Model 725 Monitor. This

expands the use of the monitor when

operators need to be highly mobile as

in an electronic manufacturing

environment. Simply attach the belt

clip with female snap connector to the

male snap connector on the monitor

bottom cover. Slide the clip over your

belt in a convenient place, so that the

wrist strap ground cord will not

interfere with normal body

movements when attached to the

monitor. Attach the dual conductor

ground clip to a suitable ground

at the work location. During

mobility, attach the dual conductor

ground clip to the parking clip on

the Model 725 Monitor

(See Section 6).

Section 6.

Parking Clip

Fig.5

A parking clip is supplied with the

Model 725 Monitor allowing mobile

users to silence the ground clip

disconnect alarm. Attaching the dual

conductor ground clip to the parking

clip prevents unnecessary

disconnecting/connecting of the wrist

strap ground cord from the input jack

during mobility. An added beneﬁt of

this feature is that it extends the life of

the dual conductor ground cord plug

and the monitor's input jack. The

parking clip is already attached to the

mounting tab of the Model 725

Monitor. If the Model 725 is to be

mounted under a work bench for

permanent use, remove the parking

clip from the Model 725 Monitor using

a small screwdriver.

Section 7.

Battery Replacement

Fig. 6

When only the red lamp illuminates on

the Model 725 Monitor, it is time to

change the battery. Unplug the wrist

strap ground cord from the 725

Monitor jack before proceeding.