ABSINA 52-230-1001 운영 매뉴얼 - 페이지 7

{카테고리_이름} ABSINA 52-230-1001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSINA 52-230-1001 13 페이지. Ev charging cable mode 2 | 3.7kw | 16a
ABSINA 52-230-1001에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지)

페이지 인쇄

• Only connect the charging cable to vehicle inlets and

household sockets that are protected from water,

direct sunlight, moisture and other liquids.

• There are electric vehicles that allow the vehicle to be

started with the charging cable plugged in. Always

make sure to disconnect the charging cable before

driving off.

• Do not use the charging cable with an extension cable

or an adapter. Modifications or alterations are

dangerous to life and lead to the immediate exclusion

of the warranty.

• If the plug connection smokes or melts, never touch

the charging cable. If possible, stop the charging

process. Switch off the power to the relevant mains

socket (fuse, FI, switch).

• Make sure that the charging cable is not accessible

to children. Only persons with a valid driving

licence for motor vehicles may operate the

charging cable.

Start charging

End charging

WALLBOX

OPERATION

1. Read the instructions for the charging cable and

2. Switch off the vehicle engine. Go to parking mode.

3. Connect the mains plug of the charging cable to a

4. The charging cable performs a self-test during

5. The POWER LED lights up to indicate that the unit is

6. Pull the protective cap off the charging plug and

7. Charging starts automatically as soon as the

8. The charging process is completed when the

9. When charging is complete, disconnect the charging

10. Put the protective cap on the charging plug and roll

SchuKo

Typ2 auf Typ2

Deutsch . English

your vehicle completely and carefully.

suitable socket (230V 16A).

which all LEDs light up briefly.

ready for charging.

connect the plug to the charging socket of your

vehicle.

CHARGE LED starts flashing green.

CHARGE LED lights up green continuously.

plug of the charging cable from the charging socket

of your vehicle and then disconnect the mains plug

from the mains socket (vehicle must be unlocked).

up the cable without kinks.