Drucker Horizon 24 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Drucker Horizon 24에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drucker Horizon 24 12 페이지. Flex centrifuge

Fig 3

•

Insert the Elastomer bushings into the motor mount plate as shown (fig 4).

•

Push the grommets onto the bushings as shown (fig 5).

Fig 6

•

Place one Aluminum spacer 30-000112 onto each stud as shown (fig 6).

•

Install the motor mount assembly onto the guard bowl studs so that the motor

wire tiedown is positioned opposite of the guard bowl splice (fig 7).

•

Install one fender washer onto each stud (fig 8).

•

Finish the assembly with one Nylok nut on each stud, and tighten to 13 in-lbs

DRUCKER DIAGNOSTICS

HORIZON 24 FLEX SERVICE MANUAL

Fig 4

Tiedown

SPLICE

Fig 7

SM029

REV A

Fig 5

Fig 8