Daikin AGZ 설치 및 유지 관리 매뉴얼 - 페이지 5

{카테고리_이름} Daikin AGZ에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daikin AGZ 12 페이지. Microtech ii chiller modbus communication module
Daikin AGZ에 대해서도 마찬가지입니다: 설치 및 유지 관리 매뉴얼 (14 페이지)

페이지 인쇄
Daikin AGZ 설치 및 유지 관리 매뉴얼

Component Data

The Modbus communication module is a printed circuit board
that inserts directly into the serial card slot of the MicroTech II
chiller unit controller as shown in
Figure 1: Modbus Communication Module Attached to Unit Controller
Figure 2
shows the two important features of the
communication module circuit board (the Modbus network
connector and 8-pin header), which are described in the
following section.
Figure 2: Communication Module Main Features
Network
GND +
Connector

8-Pin Header

www.DaikinApplied.com
Figure
1.
-

Modbus Network Connector

An RS-485 connector port connects the communication
module to the Modbus network. See
location and the table below for additional details.
Pin
1
2
3
8-Pin Header
The 8-pin header connects the MicroTech II chiller unit
controller to the communication module. See
header location.
5
IM 743-7 • MICROTECH II CHILLER UNIT CONTROLLER
Introduction
Figure 2
for connector
Function
Reference (GND)
Data B (+)
Data A (-)
Figure 2
for