Drummond Pipet-Aid XL 4-000-205 운영 매뉴얼 - 페이지 8

{카테고리_이름} Drummond Pipet-Aid XL 4-000-205에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drummond Pipet-Aid XL 4-000-205 8 페이지.

Maintenance and Servicing

Keep your Pipet-Aid clean and charged at all times. When not in use, it is appropriate

to keep the unit plugged into the charger. No damage will occur if you are using the

charger supplied.

Drummond Self-locking Filters are provided with all models that use filters.

Replacement part numbers are:

4-000-051

4-000-052

These filters must be replaced if over-pipetting occurs. They protect the handle

components as well as minimize cross contamination of samples and contain two

membrane layers.

On some models, (XP

the unit, plug in the charger and continue using the unit. Charging will take place while

in use. The charger supplied with these two units function as a power supply.

All rechargeable batteries have a limited life span; generally each battery will last

1,000 cycles (charges) and then must be replaced. Battery replacement is a user

function and will not require any special tools; a Phillips screwdriver is all you will need.

Battery Specifications – Pipet-Aid

Cat. No.

4-000-036

500 Parkway, Box 700

Broomall, PA 19008

800/523-7480 • FAX: 610/353-6204

Website: www.drummondsci.com

©Copyright Drummond Scientific Company, 2014, Rev. 3/14 Printed in USA

Pipet-Aid

5 pk

50 pk

and XL) if the battery charge becomes insufficient to operate

Rating

3.6V/750mA Ni-MH

is a registered trademark of Drummond Scientific Company

4-000-051-S

4-000-052-S

5 pk, sterile

50 pk, sterile

For Technical Assistance, call

1-800-523-7480

or e-mail