Absolare Passion 사용자 설명서 - 페이지 9

{카테고리_이름} Absolare Passion에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolare Passion 10 페이지.

7. Troubleshooting and Maintenance

Surface of the unit is dirty.

No power indicator light.

Both indicator lights are on, tube heaters

are glowing, but no sound.

Noise / hum in the sound.

Input selector does not work.

If the problem is persistent, contact your nearest ABSOLARE dealer.

8. Technical Specifications

- All tube signal section, Single-Ended architecture in both models.

- Bandwidth: 10 Hz – 45 KHz +/- 1.0dB

- Input Sensitivity: Single-Ended version 2 Volts (Balanced version 8 Volts)

- Tubes: 2 x 12AU7 (ECC82) (or 2 x E80CC interchangeable in the Signature

and Altius models).

- Inputs: 3 x RCA with Single-Ended model / 4 x XLR with Balanced version.

- Input Impedance: 100 kohm

- Output: 2 x RCA with Single-Ended / 2 x XLR with Balanced version.

- 48 step or 64-step attenuator - remote control optional

- Output impedance: 750 ohms

- Gain: 18 dB

- Dimensions: 38.2 x 54.5 x 14.6 cm (W x D x H), excluding feet.

- Weight: 18.9 kg

ABSOLARE Preamplifier User Manual 0.9

- Clean with a slightly damp cloth.

- Check AC line voltage, check the fuse.

- Check the input selector position.

- Check input and output cables.

- Check grounding of input cables.

- Check all DC power cords.