Absolare SET 사용자 설명서 - 페이지 5

{카테고리_이름} Absolare SET에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolare SET 12 페이지.

3. Unpacking and Placement

Each monoblock Amplifier is packed in a separate box. After opening the top cover

of each box, remove the upper layer of hard foam material. You can then lift each

Amplifier from its box cradling them with the cloth that is underneath the chassis.

Retain the cloth and all packing materials for future use.

Each SET Mono Amplifier may become very hot during operation. You should

always place them on support feet and leave at least 2 inches (5 cm) clearance

above each Amplifier to allow sufficient ventilation.

Each SET Mono Amplifier is designed to be supported by separate support feet.

They do not have support feet fixed in place. Feet can affect the sound quality

significantly. Feet must be positioned underneath each unit in direct contact with the

aluminum base plate – not the leather clad MDF covers. There are three areas

where the aluminum base plate is exposed through openings in the leather clad MDF

bottom plate. You can use either three or four feet.

After each Amplifier has been placed in its final position, it can be lifted in turn to

locate the support feet – firstly lifting the back (for 2 feet) and then the front (for 1 or

2 feet) to be placed underneath the chassis. Adjusting their position will also affect

the sound to varying degrees, depending on the type of rack, location or interaction

with other equipment. For the most situations, the arrangement as shown in the

diagram below is a good starting point.

ABSOLARE SET Amplifier User Manual 1.2