Anodyne Therapy Freedom 300 안전 정보 및 적용 지침 - 페이지 8
{카테고리_이름} Anodyne Therapy Freedom 300에 대한 안전 정보 및 적용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anodyne Therapy Freedom 300 20 페이지.
Anodyne Therapy Freedom 300에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. General Warnings and Precautions
- 3. Purpose of Device (Indications for Use)
- 4. Device and Parts Description
- 5. Environmental Conditions Affecting Use
- 6. Set up Instructions
- 7. Operating Instructions
- 8. Treatment Frequency
- 9. Cleaning
- 10. Maintenance
- 11. Storage
- 12. Troubleshooting
- 13. Summary
- 14. Warranty and Return Policy
- 15. Index
i
nsTruCTions
SETTING UP YOUR FREEDOM 300
Warning: If you can see any exposed wires in the electrical cords
or their connection, discontinue use and call 1-800-521-6664.
Exposed wires may be unsafe and cause electrical shock.
: Remove the system from the packaging and
STEP 1
protective plastic bag. The plastic bag may be discarded or
retained for product storage between uses.
Read the entire instruction manual prior to first use.
STEP 2:
Remove socks or other hosiery.
STEP 3:
Place the Control Unit on the floor or on a table
STEP 4:
next to an easy chair or couch where you will receive your
treatment. Be sure there is an electrical outlet close by. The
Freedom 300 is portable and does not have to be set up in
the same location each time.
Plug the Power Supply into an active electrical
STEP 5:
outlet.
When putting on or taking off the Freedom 300:
•
Make sure the cords and treatment straps are not tangled or
caught in or under furniture
•
Never step on or pull on the short cords that connect the
foot treatment pad to the calf treatment pad.
•
Never walk while the Freedom 300 is connected to your
body.
Note: If you do not set up the Freedom 300 as directed, it will not
function properly but there are no other adverse consequences.
f
u
or
se
!
8