Anolis ArcSource Outdoor 24 MC Integral SmartWhite 사용자 지침
{카테고리_이름} Anolis ArcSource Outdoor 24 MC Integral SmartWhite에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anolis ArcSource Outdoor 24 MC Integral SmartWhite 4 페이지. Submersible
Anolis ArcSource Outdoor 24 MC Integral SmartWhite에 대해서도 마찬가지입니다: 사용자 지침 (2 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄The product generates colored light by means of high power LEDs.The product was designed for exterior use
and it is ideal for locations where signaling,directional or effect lighting is required.
1.Attention
Consider the respective national norms during the installation!
Do not install the unit near naked flames.
Avoid using the unit in locations subject to possible impacts.
Do not attempt to dismantle or modify the unit.
Do not install the module in badly ventilated location
Avoid looking directly into the LED light beam at close range.
2.Installation
The ArcSource Outdoor unit can be connected to the ArcPower Rack Unit,
48
Outdoor, ArcPower 192 Outdoor, DRS. See their user manuals for full details of mains power requirements
and DMX operation.
Example of installation:
Number of connected ArcSource Outdoor 24 MC to the one LED output of the LED driver:
1 unit for ArcPower 24 Outdoor
2 units for ArPower 48 Outdoor, ArcPower 192 Outdoor, ArcZone DRS, ArcPower Rack Unit
Note: Use the T-connector Chogori 8-pin (optional accessories) for multiply units installation.
Connections:
1. ArcSource Outdoor 24 MC
User instructions
ArcSource Outdoor 24 MC
1
ArcPower 24 Outdoor, ArcPower