DryBell Vide Machine 사용자 설명서 - 페이지 2
{카테고리_이름} DryBell Vide Machine에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DryBell Vide Machine 2 페이지.
페이지 인쇄DryBell Guitar Effects
EXPRESSION PEDAL WIRING DIAGRAM
RUBBER FEET 16
The package contains 4 adhesive rubber feet (15) which can be placed on the bottom of the Vibe Machine pedal (15). If you use velcro strips to install your pedal on a pedalboard, you may
not want to use the rubber feet. The velcro should be mounted in a way that the 4 bottom screws (17) can be easily reached so you can remove the back plate afterwards.
PACKAGE CONTENTS
Vibe Machine V-1 pedal, four rubber feet in a plastic bag, user's manual.
1 YEAR BASIC WARRANTY
DryBell E.M.E.L. guarantees that the product will work without defects in materials or craftsmanship, for a period of one (1) year from the date of the purchase. Footswitch and internal bulb
replacement are covered during the first six months of warranty. If a defect occurs within the warranty period, it will be repaired as soon as possible free of charge. If the product can not be
repaired, and the model is no longer produced, the product will be replaced with a current model, or in agreement with the buyer, with a similar product. DryBell will extend the warranty
period for the duration of service failure if not repaired within 30 days (not including transportation time). If the initial buyer sells the product to a new owner, the warranty transfers to the
new owner. All transportation costs for the service within the warranty period are paid by the owner of goods. This warranty covers manufacturing defects that occurred while the product
was used according to DryBell's recommendations and instructions. The warranty does not cover loss or theft of products, and excludes failures caused by misuse, mechanical damage, liquid
damage of any kind, being dropped, unauthorized modification, shock surge in electricity supply, lightning, improper storage and natural disasters. DryBell assumes no liability for any
damages resulting from the use of this product.
visit
www.drybell.com
to find these.
5 YEAR EXTENDED WARRANTY
The original purchaser of the DryBell product is entitled to one free product repair in the period of extended warranty. Extended warranty period runs from the date of expiry of the basic
warranty (1 year) to five (5) years from the date of purchase. If your product warranty has expired, repairs are performed by installing original parts, which are chargeable. During the
extended warranty, shipping costs in both directions are payable by the original purchaser.
SPECIFICATIONS:
Model:
Manufacturer Part Number:
Input impedance ORIGINAL:
Input impedance BRIGHT:
Output imp. W/O output buffer:
Output imp. with output buffer:
External power supply:
Power supply connector type:
Max current (pulse):
CONTACT:
DryBell Electronic Musical Equipment Laboratory
Almet Stubica d.o.o.
Address:
Toplicka cesta 44,
49240 Donja Stubica, CROATIA
E-Mail:
www.drybell.com
In using this product, the customer accepts the terms and conditions set out above. There may be occasional updates on this product; please
V-1
DB2408
50kΩ
1MΩ
100kΩ
50Ω
Adapter 9V DC, (8.9Vmin > 16Vmax!)
Barrel, Plug 5.5mm/2.1mm, Center Negative
130mA (min 150mA power supply recommended)
Vibe Machine V-1 from serial No. #703, User's manual ENG, rev.3 , 11/2013
When the potentiometer rotates
clockwise (CW), speed increases.
To change the direction, replace
S and R wires. In the wiring
diagram on the left,
potentiometers are shown from
their back side.
SPECIFICATIONS (continued):
TFC output ON / OFF voltage:
TFC output impedance:
TFC output connector type:
Length:
Width (W/O jacks):
Height (W/O potentiometers):
Weight: (W/O package):
Weight: (with package):
Standard color/finish:
DryBell
START SETTINGS
ON state = 8.3V DC, OFF state = 0V
500Ω
Barrel, Plug 4.0mm/1.7mm, Center Positive
112 mm
/ 4,42 inch
60 mm
/ 2,37 inch
31 mm
/ 1,22 inch
0,270 kg
/ 0,56 lb
0,48 kg
/ 1,06 lb
Red Candy / Powder coating
Doc. No. DM0923 / Page 2