Anolis ArcSource Outdoor 24 MC Integral SmartWhite 사용자 지침
{카테고리_이름} Anolis ArcSource Outdoor 24 MC Integral SmartWhite에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anolis ArcSource Outdoor 24 MC Integral SmartWhite 2 페이지. Submersible
Anolis ArcSource Outdoor 24 MC Integral SmartWhite에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 사용자 지침 (4 페이지)
페이지 인쇄The module generates colored light by means of RGBW LED multichips. The product was designed to use
with the ArcPower drivers and for indoor use only.
1.Attention
Do not install the module near high inflammable liquids or materials.
Do not allow anything to rest on the module.
Do not use the module near high humidity or water or expose to the rain.
Do not install the module near the naked flames.
Do not install the module in dirty,dusty or badly ventilated location.
Sufficient air accessing to the cooling ribs of the module housing has to be ensured.
Use the AR111 (not included) fittings to fix the modules on a suitable place.
2.Installation
The ArcSource unit should be connected to the ArcPower drivers. See ArcPower 24 TC and ArcPower 4x24TC
user manuals for full details of mains power requirements and DMX operation.
ArcSource units are supplied with .5 m of cable for direct connection to the ArcPower drivers.
Avoid looking directly into the LED light beam at close range!
Only one ArcSource unit can be connected to the ArcPower 24 TC ( or one LED output of the ArcPower 4x24
TC).
Note: The ArcPower 24 TC (ArcPower 4x24TC) has protection against overheating of the LED
module. If the temperature iside of the ArcSource 24 MC unit exceeds max. level, the light output of
the fixture is reduced.
User instructions
ArcSource 24 MC
CAUTION!