Anolis ArcControl SU 사용자 설명서 - 페이지 6

{카테고리_이름} Anolis ArcControl SU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anolis ArcControl SU 6 페이지.

7. Troubleshooting

All 7 LED's on the controller are blinking

The controller is in bootloader mode. This is a special 'startup mode' which is run before the main firmware loads.

-Check that there is nothing metallic touching the back of the controller

-Try re-writing the firmware with the latest hardware manager

The 6 scene LED's are blinking

No showfile has been detected on the controller.

-Download the latest software

-Update to the latest firmware using the included Hardware Manager

-Try re-writing the show file

Center LED Red, cycling pattern on 6 LEDs - Error1

Center LED Green, cycling pattern on 6 LEDs - Error2

Center LED Blue, cycling pattern on 6 LEDs - Error3

The lights are not responding

-Check the DMX +, - and GND are connected correctly

-Check that the driver or lighting fixture is in DMX mode

-Be sure that the DMX address has been set correctly

-Check there are no more than 32 devices in the chain

-Check that the DMX LED is flickering to the right of the SD card

-Connect with the computer and open Hardware Manager (found in the software directory).

Open the DMX Input/Output tab and move the faders.

If your fixtures respond here, it is possibly a problem with the show file.

The controller is not detected by the computer

-Be sure that the latest software version is installed (use the beta if available)

-Connect by USB and open the Hardware Manager (found in the software directory). If it's detected here, try to

update the firmware.

-Try another USB cable, port and computer

Input Power: 5-10V DC 0.6A

Output Protocol: DMX512

Programmability: PC, Mac

Connections: USB, 8 dry contact ports

Memory: In-built flash

Temperature: -10 °C - 45 °C

Mounting: Single or double-gang wall socket

Dimentions: 146x106x10mm

Weight: 200g

Standards: EC, EMC, ROHS

Package: ArcControl SU, USB stick with software, USB cable, connector block

Optional accessories: DC power supply (P/N. 1305 1648)

Specifications are subject to change without notice.

March 27, 2017

ArcControl SU