Dryflow JJ02 사용자 설명서 - 페이지 5

{카테고리_이름} Dryflow JJ02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dryflow JJ02 12 페이지. Jet force junior hand dryer

A. Open hand dryer back Terminal Block cover.

B. Connect live wire (Coloured Brown, Red, or Black) to the terminal block marked "L".

C. Connect neutral wire (Coloured Black, Blue) to the terminal block marked "N".

D. Replace Terminal Block cover.

E. Hang hand dryer on Wall Bracket [ G ]. Slide it lightly from up to down then it is locked.

If hand dryer is supplied with cable & plug (Non UK) then follow action " E " to hang hand dryer.

5. Move the hand dryer bottom Switch Cover. Lock hand dryer by two theftproof screws.

Before replacing Switch Cover:

6. Check if the hand dryer power switch ON [Left switch].

7. There is an option to run the dryer heat element On or OFF [Right upper switch].

8. There is an option to run air speed High or Low [Right lower switch].

The switches are clearly marked.

9. Replace the Switch Cover.

CIRCUIT BREAKER [By others]

Dia.Φ8ΜΜ[5/16"]

HARD WIRE ONLY